- Articles, Lighting
- Associations, Lighting
- Design Center, Lighting
- FAQ, Lighting
- Glossary, Lighting
- Light Sources, Compare
- Magazines, Lighting
- Quotations about Light
- Research, Lighting
- Tips, Lighting
- Trade Shows, Lighting
|
LED Recessed Mini Swivel Lights, PLMS
LED Recessed Mini Swivel Lights Pegasus Associates Lighting has an energy-efficient LED recessed mini swivel light in three finishes. Perfect in cabinets, display cases, retail environments, entertainment centers, architectural built-ins, back bar displays, restaurants, museums and art galleries.
|
- Bright white LED light
- Swivels 30° in any direction
- Produces minimal heat
- High CRI of 85
- Uses only 1.25 watts
- No harmful UV or IR rays
- Rated life of 60,000 hours
- Easy to install
|
|
- Order
- Description
- Accessories
Order LED Recessed Mini Swivel Lights Here
(LED driver and electrical connectors are ordered separately on the Accessories tab.)
What's Still Needed?: a complete lighting system consists of the LED Recessed Mini Swivel Light, an LED driver (source of power), and various electrical connectors. Click the Accessories tab to order the LED driver and the connectors.
Large Quantity Discount: If you would like us to quote on a large quantity of LED Recessed Mini Swivel Lights, please call us at our toll-free number, 800.392.4818, or use the online Quotation Request for Large Quantities form. We are always happy to provide you with our best large quantity pricing.
Description of LED Recessed Mini Swivel Lights
FIXTURE
- 3 Models: matte black (PLMS-BK), white (PLMS-WH), or satin aluminum (PLMS-AL)
- Construction: die-cast aluminum alloy housing and heat sink with stainless steel clips
- Swivel: swivels about a center axis, up to 30° in any direction
- Very Shallow Depth: only 1in deep
- Inside Diameter of Trim: 1.25in
- Ceiling Hole Diameter: 1-7/8in
- Outside Diameter of Trim: 2-1/16in
- Spec Sheet: click LED Mini Swivel Light to learn more details
LIGHT SOURCE
- LED: bright white LED with a warm color temperature of 3100K
- Very Good CRI: 85 Color Rendering Index
- LED Beam Angle: the Mini Swivel Light comes equipped with a 25° spot lens; if a wider beam is preferred, simply replace the installed spot lens with the optional 110° flood lens that has been included
- Excellent Rated Life: 60,000 hours
- Cool Operation: gives off very little heat
ELECTRICAL FEATURES
- Energy-Efficient: uses only 1.25 watts of power
- Linkable: maximum of 8 LED Mini Swivel Lights can be powered by one 10-watt LED driver
- 38in Leads: each LED Mini Swivel Light has 38in leads
- Choice of 2 Power Supplies: one of the following LED drivers is required and sold separately on the Accessories tab
1) P-901010350-PLU-B: 350mA constant current Plug-In LED Driver, 10 watts maximum, 10ft electrical cord
2) P-901010350: 350mA constant current Hardwire LED Driver, 10 watts maximum. Please refer to these Installation Instructions for the Hardwire LED driver (PDF). (Please refer to the Table of Components below to determine the number of Drivers that will be needed for your circuit.)
- Switching: either LED driver may be controlled by a single on/off wall switch. The Hardwire LED driver can be controlled by a single on/off wall switch if it is hardwired directly to the on/off wall switch whereas the Plug-In LED driver can be controlled by a single on/off wall switch if that wall switch controls the single outlet that the Plug-In LED driver is plugged into.
- Not Dimmable: this LED Mini Swivel Light is not dimmable
- Easy to Install: for complete details with photos please read these Installation Instructions
ACCESSORIES (click the Accessories tab to order any of the following items)
- Power Connector/Extension Cable: this multi-use cable (made up of 22 AWG wire) with 38in leads can be used as a Power Connector and/or an Extension Cable. (Please refer to the Table of Components below to determine the number of Power Connectors/Extension Cables that will be needed for your circuit.)
- End Cap: needed to complete the electrical circuit. (Please refer to the Table of Components below to determine the number of End Caps that will be needed for your circuit.)
- Terminal Block: one Terminal Block is needed to connect a Plug-In LED Driver to a Power Connector/Extension Cable; no Terminal Block is needed if a Hardwire LED Driver is used
TABLE of COMPONENTS
# of LED Swivel
Lights/Circuit |
# of 10W LED
Drivers Needed |
# of Power Connectors/
Extension Cables Needed |
# of End Caps
Needed |
| 1 |
1 |
1 |
1 |
| 2 |
1 |
1 or 2 * |
0 or 1 * |
| 3 |
1 |
3 |
1 |
| 4 |
1 |
4 |
1 |
| 5 |
1 |
5 |
1 |
| 6 |
1 |
5 |
1 |
| 7 |
1 |
7 |
1 |
| 8 |
1 |
8 |
1 |
* Note: If the 2 LED Swivel Lights will be located closer than 72in from each other, then only 1 Connector is needed and no End Cap is needed. If the 2 LED Swivel Lights will be located further than 72in from each other, then 2 Connectors are needed and 1 End Cap is needed. |
    
Accessories for LED Recessed Mini Swivel Lights
Plug-In 10W LED Driver (One plug-in or hardwire LED Driver is required to power a circuit.)
Hardwire 10W LED Driver (One plug-in or hardwire LED Driver is required to power a circuit.)
Power Connector/Extension Cable (At least one Connector is required for each circuit.)
End Cap (One End Cap is generally required for each circuit.)
Terminal Block (One Terminal Block is required if a Plug-In LED Driver is used.)
|
my cart | home | order status | customer service | about us | forum | blog | contact us
